MB73 and MB73P+ 2018-02-08T14:35:29+00:00

MB73+ and MB73P+

Designed for heavy-duty aircraft and marine batteries, and others in performance-critical environments.

Developed from our military range, and aimed at the commercial market, the MB73+ range units are universal battery analyzer (capacity tester) and charger combined into one compact unit.

Using these advanced battery charger / analysers from Intelligent Charging Limited, crucial battery maintenance becomes a simple and economical automated process, with no attention required from ‘START’ to ‘PRINT RESULTS’.

Battery Range:

  • Can Charge And Capacity Test Batteries From 1.2V up to 40V !

Charge:

  • Charges Almost All Battery Technologies
  • 50A For 12V Batteries
  • 25A For 24V Batteries

Capacity Test:

  • 60A For 12V Batteries
  • 50A For 24V Batteries

And many more advanced features!

commercial batteries
Data Sheet
Operators Manual
MB73 Battery Charger Analyser
Close up of battery charger
Battery Charger Analyzer with Leads

Product Details for MB73+ and MB73P+

  • Charge: 30A For 12V Batteries Or 15A For 24V Batteries
  • Capacity Test: 60A For 12V Batteries Or 40A For 24V Batteries
  • Charge: 50A For 12V Batteries Or 25A For 24V Batteries
  • Capacity Test: 60A For 12V Batteries Or 50A For 24V Batteries
  • Can Charge And Capacity Test Batteries From 1.2V up to 40V
  • Charges Almost All Battery Technologies
  • Constant Voltage Charge
  • Constant Current Charge
  • Constant Current 4 Step Charge – Steps Can Be Used As Rest Periods
  • Battery Failure Or Overcharge Detection
  • 24 User-Programmed Battery Data Libraries
  • Intuitive Data Entry. Only Three Keystrokes Needed To Start
  • Battery Volts Amps & Time Displayed On A Clear Display
  • Shows Calibration Status
  • Audio Alarm To Indicate Process Completion Or Failure
  • Internally Protected From Overloads
  • Reverse Or No Battery Connection Protected
  • Automatically Shuts Down If Battery Disconnected During Charge
  • MB73+ 23kg (50lbs)
  • MB73P+ 26kg (57lbs)
  • H. 44cm x W. 35cm x D. 23cm (H. 10.6 x W. 18.1 x D. 13.8 inches)
  • Built In Printer For Audit Trail
  • Individual Cell Monitoring For NiCad batteries using (optional) TH20 cell monitor accessory
  • 240v Or 115v 50-60hz
  • Mains Input Selectable
  • Bench Mounted
  • Supplied With 1 Set Of Leads 100cm Long With 8mm Ring Crimps
  • Alternative Or Longer Lead Sets Available
  • 1 Year RTB Warranty
Contact Us

Want to know more about this product?

Send us your questions and we will happily respond to you with our knowledge and expertise!
Contact Us