SBSC11Q 2017-06-16T11:52:52+00:00

SBSC11Q

 

Intelligent Charging originally designed this product for a specific need of the British Army, and we are now able to offer the SBSC11Q for both military and commercial use.

Channels and Battery Range:
The SBSC11Q is a battery charger designed to simultaneously charge up to four SBSC11 sealed lead acid batteries or other SBS type batteries having a nominal voltage of 12.0V

Charge:
Automatic Bulk charge to 14.4V at maximum current of 9.0A switching to float charge at 13.74V

Controls and Metering:
Battery charge control is simply via STOP/START push buttons, allowing battery interchange without the need to remove power from the unit or connecting/disconnecting live output.

Many other advanced features can be seen on the product details below.

Data Sheet
Operators Manual

Product Details for SBSC11Q

  • The SBSC11Q is a battery charger designed to simultaneously charge up to four SBSC11 sealed lead acid batteries or other SBS type batteries having a nominal voltage of 12.0V
  • Automatic Bulk charge to 14.4V at maximum current of 9.0A switching to float charge at 13.74V
  • Battery charge control is simply via STOP/START push buttons, allowing battery interchange without the need to remove power from the unit or connecting/disconnecting live output
  • Field calibration possible, no need to return the unit back to factory for calibration
  • 10.0A Resettable circuit breakers are fitted to each battery connection to protect both the battery and the unit from short circuits or faults
  • The unit is reverse connection protected and will show an error condition if START is pressed while battery reverse connection is made
  • The unit detects non battery connection and will show an error if less than 0.8V is detected at the battery terminals
  • The unit will automatically perform a desulphation charge if a battery connected exhibits a terminal voltage less than 9.0V
  • Battery volts / amps and time is displayed on a three digit red 7 segment display
  • Display and Indicators brightness can be controlled from dim to very bright so display can be seen in daylight conditions
  • Clear indication of Bulk Charge, Trickle Charge, Desulphation Charge and Error conditions
  • The unit accepts a universal mains input of 80-264 VAC/47-63 Hz
  • 12kg (26lbs)
  • It is housed in a metal enclosure designed for bench mounting
  • W. 373mm x H. 245mm x D. 219mm
  • The battery connecting lead is made via a non reversible 2 pin 50A connector
  • The unit is supplied lead sets fitted with 8.0mm crimp terminals for connection to the battery
  • 1 Year RTB Warranty

 

Contact Us

Want to know more about this product?

Send us your questions and we will happily respond to you with our knowledge and expertise!
Contact Us